Actualidades

MOULDS FOR RAILWAY INFRASTRUCTURE: GBM & UB5

Moldtech’s GBM and UB5 moulds for railway infrastructure produce precast concrete elements for retaining walls and drainage channels along railway lines. These elements support soil retention and water management alongside the track. The video presents different mould models designed to meet the geometries and production requirements of these precast elements. The GBM range combines rigid

MOULDS FOR RAILWAY INFRASTRUCTURE: GBM & UB5 Read More »

50- AND 30-METRE COLUMN MOULDS IN PRODUCTION IN SPAIN

Two column moulds, measuring 50 and 30 metres, designed and manufactured by Moldtech, operating at a precast concrete plant in Spain. The video shows each stage of column production: mould preparation, reinforcement placement, concrete pouring, finishing, demoulding and lifting. Follow the complete process through to the finished columns, including the corbels required for their use

50- AND 30-METRE COLUMN MOULDS IN PRODUCTION IN SPAIN Read More »

MOLDTECH MANUFACTURES 30- AND 50-METRE MOULDS FOR PRECAST CONCRETE COLUMNS FOR INDUSTRIAL BUILDINGS IN SPAIN

Moldtech has manufactured two column moulds, 30 and 50 metres long, for the production of precast concrete columns for industrial buildings in Spain. Both units form part of the same supply and feature configurable bases, hydraulic side-panel opening and closing, and pneumatic vibration. The resulting columns will form part of the buildings’ load-bearing structures. Their

MOLDTECH MANUFACTURES 30- AND 50-METRE MOULDS FOR PRECAST CONCRETE COLUMNS FOR INDUSTRIAL BUILDINGS IN SPAIN Read More »

PRECAST CONCRETE FACADE MOULD | HYDRAULIC DEMOULDING

Moldtech manufactures this type 1 precast concrete facade mould, model 3.35 × 3 m, combining a fixed structure, pneumatic vibration and hydraulic demoulding assistance for the production of architectural concrete elements. The assembly incorporates the frame, base and central core, together with fixed side panels that define the component’s geometry. Four HFP 6000C pneumatic vibrators

PRECAST CONCRETE FACADE MOULD | HYDRAULIC DEMOULDING Read More »

MOLDTECH SUPPLIES A MODULAR SYSTEM FOR I-BEAMS IN THE DOMINICAN REPUBLIC

Moldtech has completed the installation of a modular side mould system for producing precast concrete I-beams in the Dominican Republic. The equipment accommodates beams up to 43 metres long in three different heights and incorporates pneumatic vibration and a dedicated lifting device for handling the side moulds. The project brings specialised manufacturing equipment to a

MOLDTECH SUPPLIES A MODULAR SYSTEM FOR I-BEAMS IN THE DOMINICAN REPUBLIC Read More »

FLEXIBLE COLUMN MOULD FOR PRECAST CONCRETE

Explore Moldtech’s flexible column mould for precast concrete production, featuring 50-metre side panels, configurable bases and provisions for side corbels. Designed to accommodate different column geometries, this system incorporates: • Hydraulic side-panel opening and closing. • Pneumatic vibration for concrete compaction. • Magnetic fixing for upper formwork and transverse separators. • Upper closures adjustable to

FLEXIBLE COLUMN MOULD FOR PRECAST CONCRETE Read More »

MOLDTECH INTEGRATES POWER TROWELLING INTO PRECAST PANEL PRODUCTION IN HUNGARY

A Moldtech installation now operating in Hungary incorporates screeding and power trowelling equipment to improve the upper-surface finish of precast concrete panels. The project also includes two tilting tables and five laser projectors that support simultaneous formwork positioning on both tables. Panel quality extends to the upper surface When precast panels are manufactured horizontally, the

MOLDTECH INTEGRATES POWER TROWELLING INTO PRECAST PANEL PRODUCTION IN HUNGARY Read More »

HOW PRECAST CONCRETE PANELS GET A SMOOTH FINISH

How do precast concrete panels get a smooth finish? Watch Moldtech’s tilting table and gantry-mounted screeding and power trowelling system at work, from mould preparation and concrete pouring to surface finishing. This video follows the production process inside a precast concrete plant, showing how the vibrating screed levels the fresh concrete before the power trowel

HOW PRECAST CONCRETE PANELS GET A SMOOTH FINISH Read More »

600-TON PRESTRESSING BED FOR THE PRODUCTION OF PRESTRESSED CONCRETE BEAMS IN SPAIN

Moldtech has developed a 600-ton prestressing bed for the production of prestressed concrete beams for a customer in Spain. The equipment combines a high-capacity structure, active and passive heads, and a hydraulic release system designed to control the different stages of the prestressing process. A solution for producing prestressed beams in different configurations The production

600-TON PRESTRESSING BED FOR THE PRODUCTION OF PRESTRESSED CONCRETE BEAMS IN SPAIN Read More »

ADJUSTABLE COLUMN MOULD FOR PRECAST PLANTS

Discover Moldtech’s high-precision column moulds, designed for modern precast concrete plants. Our modular and adjustable mould systems enable efficient production of reinforced and prestressed concrete columns for industrial, commercial and residential construction projects. Key features and advantages: High dimensional accuracy and a superior concrete finish. Adjustable width and height configurations to accommodate different column sizes.

ADJUSTABLE COLUMN MOULD FOR PRECAST PLANTS Read More »

ONE MOULD, THREE CONFIGURATIONS: MOLDTECH DEVELOPS A NEW INVERTED TIMPAN MOULD FOR ROMANIA

Moldtech has developed an Inverted Timpan Mould for a project in Romania, available in T1, T2 and T3 configurations and designed for the industrial production of non-prestressed precast concrete elements. The solution combines a dedicated steel structure, opening and closing systems, magnetic fixing and pneumatic vibration, resulting in equipment focused on repeatability, dimensional accuracy and

ONE MOULD, THREE CONFIGURATIONS: MOLDTECH DEVELOPS A NEW INVERTED TIMPAN MOULD FOR ROMANIA Read More »

SIX TABLES, ONE PRODUCTION LOGIC: MOLDTECH DEVELOPS A CANADIAN INSTALLATION FOR PANELS UP TO 17.3 METRES

Manufacturing large-format precast concrete panels requires more than simply having a large moulding surface. When panels exceed 17 metres in length, the challenge lies in controlling demoulding, maintaining geometry, compacting the concrete correctly and coordinating the movement of several production tables within the same plant. This is the approach behind the new supply developed by

SIX TABLES, ONE PRODUCTION LOGIC: MOLDTECH DEVELOPS A CANADIAN INSTALLATION FOR PANELS UP TO 17.3 METRES Read More »

24 TABLES. ONE STANDARD. MOLDTECH, CUSTOM DESIGN AND MANUFACTURING FOR LARGE-SCALE PROJECTS

A large-scale project that once again places Moldtech’s engineering expertise and manufacturing capabilities at the service of the international precast concrete industry. The company has designed, manufactured and supplied a total of 24 tilting tables in Argentina for the industrial production of non-prestressed precast concrete panels. The scale of this supply reflects the trust that

24 TABLES. ONE STANDARD. MOLDTECH, CUSTOM DESIGN AND MANUFACTURING FOR LARGE-SCALE PROJECTS Read More »

MOLDTECH DEVELOPS AN AUTOMATED LINE IN SPAIN FOR HANDLING AND FINISHING PRECAST BATHROOM PODS FOR RESIDENTIAL CONSTRUCTION

Moldtech has developed an automated circulation line for the internal transport, positioning and transfer of precast concrete bathroom pods at an industrialised construction plant in Spain. The solution coordinates the movement of the modules between different workstations and storage positions, integrating longitudinal travel, transverse transfer, lifting, positioning, occupancy detection and centralised control. The project forms

MOLDTECH DEVELOPS AN AUTOMATED LINE IN SPAIN FOR HANDLING AND FINISHING PRECAST BATHROOM PODS FOR RESIDENTIAL CONSTRUCTION Read More »

TILTING TABLES FOR PRECAST CONCRETE PANELS

At Moldtech, we transform the manufacturing process of precast concrete panels. In this video, we explore the operation and advantages of our tilting tables, specifically designed for producing prestressed concrete panels in industrialised construction plants. Discover how to optimise every work cycle—from mould surface preparation to final panel removal—ensuring maximum dimensional accuracy and process control

TILTING TABLES FOR PRECAST CONCRETE PANELS Read More »

HOW TO PRODUCE 50M PRESTRESSED T-BEAMS WITH HIGH PRECISION

Discover the capabilities of Moldtech’s TT 600 T MOULD, a high-performance solution designed for manufacturing prestressed concrete beams with variable cross-sections. The system consists of four modules forming a continuous production line with a 50-metre useful length, enabling the efficient manufacturing of both T and double T sections. Its key technical features include: Hydraulic side

HOW TO PRODUCE 50M PRESTRESSED T-BEAMS WITH HIGH PRECISION Read More »

MOLDTECH COORDINATES NINE SIMULTANEOUS PROJECTS ACROSS THREE CONTINENTS

Moldtech is simultaneously carrying out the installation and commissioning of nine projects in France, Spain, Canada, Romania, Argentina and Ghana. This international deployment, spanning Europe, the Americas and Africa, reflects not only the company’s technical capacity to develop equipment for different precast concrete applications, but also the strength of its industrial, logistical and organisational structure.

MOLDTECH COORDINATES NINE SIMULTANEOUS PROJECTS ACROSS THREE CONTINENTS Read More »

THE MOLDTECH TEAM: SUPPORTING PRECAST PROJECTS WORLDWIDE

 Supporting Our Clients Worldwide Behind every project, there is much more than moulds and equipment: there are people, experience and a way of working focused on the real production needs of each precast plant. At Moldtech, we design and manufacture solutions for the precast concrete industry with a technical, precise and customer-adapted approach, supporting international

THE MOLDTECH TEAM: SUPPORTING PRECAST PROJECTS WORLDWIDE Read More »

MOLDTECH COMPLETES THE INSTALLATION OF SIX PRODUCTION TABLES FOR ARCHITECTURAL CONCRETE PANELS IN PORTUGAL

A new installation designed to strengthen the production of precast façades for Portugal’s growing residential market Moldtech has successfully completed the installation and commissioning of six production tables for the manufacture of architectural concrete panels for residential façades in Portugal. This new installation will enable one of the country’s leading precast concrete manufacturers to significantly

MOLDTECH COMPLETES THE INSTALLATION OF SIX PRODUCTION TABLES FOR ARCHITECTURAL CONCRETE PANELS IN PORTUGAL Read More »

Scroll to Top