Actualidades

In its constant expansion in Asia, Moldtech has recently supplied two tilting tables for an important precast manufacturer and residential developer in Philippines. The tables, with dimensions of 11,8×4 meters, are specially designed for manufacturing façade panels for large high rise residential developments near Manila. The tables are built with a lower shuttering band with height adjustment […]

Moldtech has designed, fabricated and commissioned two hydraulic moulds for columns to the Portuguese group Mota-Engil. The leading construction group in Portugal and ranking among the 30 largest European construction groups has international presence in 25 countries in Europe, Africa and South America. The moulds commissioned by Moldtech, with 15m length each, have double production lines and adjustable

Moldtech is currently designing 3 units of its MT20 machinery system for the efficient manufacturing of drycast box culverts for clients in India, Colombia and Ecuador. Our innovative MT20 system is a result a of years of research and development after a thorough study of the market for precast box culverts. Most production facilities consist of big

Moldtech has recently supplied and installed a full carrousel plant for wall panels and special double tee elements for a client in Argentina. The circulation system layout has been designed according to client’s requirements for the production of different types of elements on the same carrousel line. The client, Tensar S.R.L., is an important manufacturer

Moldtech has been awarded a project by an important precast manufacturer in Sweden for the design and manufacturing of 2 moulds for precast post-tensioned segments for the construction of structural pylons for an important bridge in Umeå, Sweden. The project is going to be an important landmark in the region and an impressive structure with a cantilevered

Moldtech has recently supplied a modular mould system for wetcast box culverts for an important precast manufacturer in Northern Ireland. The mould has a height of 2 meter and allows producing precast box culverts and half-culverts of a huge range of section dimensions between 1 x 1 m and 6 x 6 m. The mould is manually

Jensen Precast recently placed an order with Moldtech for the fabrication of 2 pouring buckets and a box culvert. The company, which is going to use this equipment for its current projects, is the leading manufacturer of box culverts in the USA with production plants in Nevada, California, Arizona and Hawaii. The pouring buckets are equipped with an electric

Due to the high volume of work, mainly for overseas markets, this October Moldtech is to take on a new expansion of their facilities. This will be the second time in two years that Moldtech has increased their productive capacity. The previous time, in 2013, they purchased the current facilities. By the end of the

Grupo Santos, the leading construction company in Honduras, has recently undertaken an expansion of their productive capacity in one of their national facilities—the one in the capital,Tegucigalpa—by incorporating a flexible self-supporting system for bridge girders to their productive technology. Driven by the current volume of work in civil engineering, the management at Grupo Santos decided to maintain

Moldtech has recently installed 2 tilting tables for an important client near Madrid. These tables with 7,5x4m and 13x4m dimensions are specially designed for manufacturing façade panels for residential developments. The tables are built with 2 shuttering bands, upper and lower, for panels with up to 4m height. The special polishing of the plate in contact with

Back in 2014 Moldtech successfully installed a factory for the production of beams near Delhi for the Indian B.G. Shirke group which specializes in mass construction of low cost precast houses. Last May both companies have sealed a new contract, this time for the supply of a carrousel plant for the production of precast hollow core columns.

The mould allows manufacturing elements with a foot/base and 2 walls forming a corner. The mould is prepared to cast the pieces upside down, producing elements with up to 1,2×1,2×1,2m size, with the possibility to adjust the height using a movable bottom shutter support. The mould is equipped with an upper working platform allowing easy

Moldtech has recently supplied a modular mould system for wetcast box culverts for a client in Poland. The mould has a height of 1 meter and allows producing precast box culverts and half-culverts with dimensions between 1.5×2 m and 3×2 m. The mould is manually operated and allows simple and fast assembly, adjustment and operation. The system

After a joint research and development process, Moldtech has defined with a client in Argentina a plan for acquiring new equipment which will allow accelerating production times, reducing by 70% manufacturing costs of floor slabs and double tee roof slabs. Moldtech has supplied a semi-automatic machine for concrete spreading, with 3.5 cubic meters capacity and a

Moldtech has recently designed and installed special moulds systems for wet-cast box culverts in United Kingdom. The dimensions of the moulds will allow producing precast concrete box culverts of inner dimensions from 1×1,5m up to 1,8×3,6 meters and with up to 2 m height/depth. According to client´s requirements, these special moulds have been designed with a self-collapsing

The mould, which is 134m (440ft) in length, is designed for the casting of TT slabs with a width of 3.66m (12ft). The length of these slabs is defined by transversal stoppers which can be positioned at any place alongside the length of the mould. The equipment integrates the stressing heads for all stressing and de-tensioning operations,

Moldtech has recently completed the installation of new equipment for the production of precast concrete elements for an African company specialized in construction and major infrastructures for public works. The firm was founded in the Gulf of Guinea and, as part of its corporate growth, it has developed several programs in neighbouring countries such as Ivory

The company is a 70-year-old producer of precast concrete in Dokka (Norway) that stands out for its quality and innovative focus. All their products are custom made for each project, requiring a high degree of flexibility in our production. Dokka is very cold place, so the curing process takes a little longer in the winter.