news

Moldtech currently has more than twenty MT20 equipment for the manufacture of dry-concrete box-culverts, installed on 4 continents. The MT20 is the result of years of study and analysis of the current market for precast dry concrete box-culverts. Most of today’s box-culvert production facilities have large machines installed in expensive civil works and pits. In addition, […]

Prefabricados de Hormigones Montalbán y Rodríguez, S.A. is a Spanish client located in the province of Murcia. This company manufactures a wide range of precast concrete products, being its specialty the production of lightweight precast elements, urban furniture and architectural concrete. After long experience working with our moulds with successful results, the company relies, once

Tuberías y Prefabricados Palau S.A.is a national client, located in the province of Lleida, with whom we have been working continuously for more than 10 years, and which mainly manufactures large-sized frame and semi-frame pieces for civil works, see transversal drainage works. It´s about a mould with which they manufacture precast concrete dividing pieces, commonly

The French market is becoming more and more important for Moldtech as a supplier of equipment for quality precast elements. For this reason, it has just added to its client portfolio an important precast concrete company located in the Midi-Pyrénées region, specialized in the production of standardized and tailored-made precast elements, for residential and industrial

The work is being carried out by the company UMB Spedition while the client is the National Company for the Administration of Road Infrastructure (CNAIR). UMB is a family enterprise led by Mr. Umbrerescu, and is a leading construction company. This well consolidated company has an extraordinary capacity as far as human resources and production

The Caribbean Island of Curaçao, located near Venezuela, is going to construct a public park where the walkways have to incorporate a large amount of stairs. Instead of using a traditional cast in situ system with wooden shutters the contractor has preferred to use mechanical stair moulds of Moldtech made out of steel as this

The project includes equipment for two precast plants located in different parts of the Spanish geography. The first project, for a production plant for industrial buildings, comprises: a 100-meter-long  universal bed  base with a working capacity of up to 650 tons, a  set of mold  sides for the production of “L”, “T” and “rectangular” beams

Our client, which is a leading construction company operating in this geographic area, switched from “cast in place” to precast after an interchange of ideas with Moldtech engineers. This collaboration finally resulted in that a variety of products like drainage channels, New Jersey barriers, box culverts etc.. are now produced using precast thereby increasing quality

Moldtech has recently installed two tilting tables for a customer in the Loire region. The client, specialized in residential projects, has decided to invest in new equipment given the growing demand in the west and north of France for industrialized single-family homes. Moldtech has designed, manufactured and installed two 12×4 m tilting tables, with an adjustable lower

This machine belongs to the so-called auxiliary equipment category which does not produce any concrete elements itself but fulfil an absolutely critical role in making certain operational tasks easier at the precast factory. In this sense the turners can have a great impact when the casting position of the precast element is not the same

The client, who already had equipment supplied by Moldtech in the past, ordered these two buckets at the beginning of the year in order to renew some of the equipment of its plant in central Portugal. These concrete buckets include all standard features of Moldtech skips, such as opening/closing of the discharge gate by means of hydraulic

Mid 2019 Moldtech signed a large contract for the supply of equipment for precast concrete in relation to the construction of bridges in Romania.  Last week we completed the supply of the parapet moulds. The parapets are considered as a so-called “third grade” elements from a structural point of view but are a necessary element

With these two buckets the client is able to completely unload a full ready-mix truck, thus reducing waiting times and cost. These concrete buckets include all standard features of Moldtech skips, such as opening/closing of the discharge gate by means of hydraulic cylinders and autonomous power supply by batteries. The hydraulic pump, electrical panel and

Moldtech was selected by an important construction company specialized in infrastructures, for the design, manufacture and commissioning of the equipment for precast elements for road and highways bridges. The project includes a universal bed of 100 meters length, and the complementary moulds for the bed, allowing to produce “I beams” for bridges. The customer has relied on

Once again Moldtech keeps meeting challenging delivery terms, even amid the difficult situation of worldwide supply chains and quarantine regulations in the spring of 2020, in this case delivering a mould for crane counterweights. This special mould is built with 4 detachable parts that are bolted together and onto a bottom baseplate to form the

At present day Moldtech has proudly finished a few successful projects in Spain, in which the different types of installed equipment are working at full capacity. Among the different types of equipment commissioned are some  tilting tables  with special upper shutters with hydraulically controlled position adjustment and operated by radiofrequency remote control and an aerial

This mould which is being built for a Canadian client can not only make box culverts in various sizes and wall thicknesses but can also be used for making other rectangular building elements such as stairwells and elevator shafts. As normally the box culverts have a chamfer and elevator shaft don’t Moldtech designed an ingenious

After three years of an intense exchange of ideas and negotiations, Moldtech was selected by an important Moroccan company specialized in the promotion of residential buildings, for the design, manufacture and commissioning of the equipment for precast elements in universal bed. The project includes a universal bed with a prestressing capacity of up to 600

This week, a mould of 36-meter for columns was arrived to Mexico, with a double production lines, and with production capacities ranging from 300 x 300 mm to 800 x 800 mm. The versatility of this mould, capable of producing large columns with corbels in the 3 sides and lengths of more than 25 meters. This mould

In the last years Moldtech participates in this event being part of the stand of its agent for USA and Canada which is the Nox-crete company with head office in Omaha, Nebraska. Nox-crete is a leading manufacturer of release agent. Moldtech already concluded an important number of projects for the installation of equipment for precast concrete companies in the