news

An important private company whose facilities are located in Galati (Romania), is specialized in the execution of residential and non-residential construction works and related facilities, hydrotechnical works, road and bridge construction, sewerage works and water supply . On this occasion, Moldtech was selected by this company for the design, manufacture and commissioning of two molds for […]

This universal bed system has a fixed base system that allows the production of beams with a base up to 80 cm. The tensioning head system has relaxation cylinders and the corresponding tensioning equipment, for 12- and 15-mm diameter strands. This system will allow our client to start developing the market for industrial and logistics warehouses in

This project has been a technological challenge that allows us to continue growing in the development of electricity infrastructures in Algeria. The project includes equipment to produce electric poles according to the regulations of SONELGAZ, a historic electric power and gas operator in Algeria. SONELGAZ has been and is a promoter of electricity and gas

The client, a large multinational construction firm, entrusted Moldtech the design, construction, and commissioning of a flexible mould for precast staircases. The mould allows producing staircases with up to 19 steps and 2 landings, and with a maximum width of 2m. The vertical casting allows having the 2 sides of the stairs with a perfect finish.

For several years, Moldtech has introduced a new generation of hydraulic 3D molds to the market that are used both for the manufacture of bathrooms and for housing modules. The company Katerra was awarded a series of contracts for the construction of villas where the company is leading an innovation trend in the KSA building

The French precast market is one of the most advanced in Europe with a high level of innovation and technology. Moldtech competes in this market offering high quality solutions combined with full service which includes transportation, installation and commissioning. The French precast industry comprises of large companies with high production capacity but also medium and

Moldtech currently has more than twenty MT20 equipment for the manufacture of dry-concrete box-culverts, installed on 4 continents. The MT20 is the result of years of study and analysis of the current market for precast dry concrete box-culverts. Most of today’s box-culvert production facilities have large machines installed in expensive civil works and pits. In addition,

Prefabricados de Hormigones Montalbán y Rodríguez, S.A. is a Spanish client located in the province of Murcia. This company manufactures a wide range of precast concrete products, being its specialty the production of lightweight precast elements, urban furniture and architectural concrete. After long experience working with our moulds with successful results, the company relies, once

Tuberías y Prefabricados Palau S.A.is a national client, located in the province of Lleida, with whom we have been working continuously for more than 10 years, and which mainly manufactures large-sized frame and semi-frame pieces for civil works, see transversal drainage works. It´s about a mould with which they manufacture precast concrete dividing pieces, commonly

The French market is becoming more and more important for Moldtech as a supplier of equipment for quality precast elements. For this reason, it has just added to its client portfolio an important precast concrete company located in the Midi-Pyrénées region, specialized in the production of standardized and tailored-made precast elements, for residential and industrial

The work is being carried out by the company UMB Spedition while the client is the National Company for the Administration of Road Infrastructure (CNAIR). UMB is a family enterprise led by Mr. Umbrerescu, and is a leading construction company. This well consolidated company has an extraordinary capacity as far as human resources and production

The Caribbean Island of Curaçao, located near Venezuela, is going to construct a public park where the walkways have to incorporate a large amount of stairs. Instead of using a traditional cast in situ system with wooden shutters the contractor has preferred to use mechanical stair moulds of Moldtech made out of steel as this

The project includes equipment for two precast plants located in different parts of the Spanish geography. The first project, for a production plant for industrial buildings, comprises: a 100-meter-long  universal bed  base with a working capacity of up to 650 tons, a  set of mold  sides for the production of “L”, “T” and “rectangular” beams

Our client, which is a leading construction company operating in this geographic area, switched from “cast in place” to precast after an interchange of ideas with Moldtech engineers. This collaboration finally resulted in that a variety of products like drainage channels, New Jersey barriers, box culverts etc.. are now produced using precast thereby increasing quality

Moldtech has recently installed two tilting tables for a customer in the Loire region. The client, specialized in residential projects, has decided to invest in new equipment given the growing demand in the west and north of France for industrialized single-family homes. Moldtech has designed, manufactured and installed two 12×4 m tilting tables, with an adjustable lower

This machine belongs to the so-called auxiliary equipment category which does not produce any concrete elements itself but fulfil an absolutely critical role in making certain operational tasks easier at the precast factory. In this sense the turners can have a great impact when the casting position of the precast element is not the same

The client, who already had equipment supplied by Moldtech in the past, ordered these two buckets at the beginning of the year in order to renew some of the equipment of its plant in central Portugal. These concrete buckets include all standard features of Moldtech skips, such as opening/closing of the discharge gate by means of hydraulic

Mid 2019 Moldtech signed a large contract for the supply of equipment for precast concrete in relation to the construction of bridges in Romania.  Last week we completed the supply of the parapet moulds. The parapets are considered as a so-called “third grade” elements from a structural point of view but are a necessary element

With these two buckets the client is able to completely unload a full ready-mix truck, thus reducing waiting times and cost. These concrete buckets include all standard features of Moldtech skips, such as opening/closing of the discharge gate by means of hydraulic cylinders and autonomous power supply by batteries. The hydraulic pump, electrical panel and

Moldtech was selected by an important construction company specialized in infrastructures, for the design, manufacture and commissioning of the equipment for precast elements for road and highways bridges. The project includes a universal bed of 100 meters length, and the complementary moulds for the bed, allowing to produce “I beams” for bridges. The customer has relied on