Actualidades

This mould which is being built for a Canadian client can not only make box culverts in various sizes and wall thicknesses but can also be used for making other rectangular building elements such as stairwells and elevator shafts. As normally the box culverts have a chamfer and elevator shaft don’t Moldtech designed an ingenious […]

After three years of an intense exchange of ideas and negotiations, Moldtech was selected by an important Moroccan company specialized in the promotion of residential buildings, for the design, manufacture and commissioning of the equipment for precast elements in universal bed. The project includes a universal bed with a prestressing capacity of up to 600

На этой неделе в Мексику прибыла форма длиной 36 метров для колонн с двумя производственными линиями и возможностью производства колонн сечением от 300 x 300 мм до 800 x 800 мм. Универсальность этой формы позволяет изготавливать крупные колонны с консольными выступами с трех сторон и длиной более 25 метров. Эта форма уникальна в стране и

In the last years Moldtech participates in this event being part of the stand of its agent for USA and Canada which is the Nox-crete company with head office in Omaha, Nebraska. Nox-crete is a leading manufacturer of release agent. Moldtech already concluded an important number of projects for the installation of equipment for precast concrete companies in the

Last January Moldtech successfully completed the installation and commissioning of a new tilting table for precast concrete panels for the company Forjados-Santa Comba, in Spain. The client, a renowned precast company established in 1976 in La Coruña, producing concrete products, precast structural components and cement products, has a wide range of solutions for the construction of prefabricated structures

In order to attend the requests by many of their clients, Moldtech has incorporated a vehicle for the transport and pouring of the concrete in its ever-expanding product line. This vehicle, called Giraffe, provides a very good solution for bringing the concrete to the mould when there is no flying bucket or pouring buckets available

Moldtech недавно построила и установила 3 стационарных стола на Филиппинах для производства полуплит, используемых при строительстве мостовых настилов культового моста Cebu-Cordova Link Expressway, который соединит город Себу с городом Кордова на острове Мактан. Проект, являющийся важной вехой в инфраструктуре страны и впечатляющим инженерным достижением, реализуется консорциумом, состоящим из испанской компании Acciona и двух местных партнеров

Moldtech has recently installed two stationary tables for balconies and slabs, a tilting table and a flexible size mould for staircases for a client in Warsaw. The company, specialized in the supply of precast elements for residential projects, has decided to invest in new equipment to meet the increasing demand in Warsaw and central Poland of high-quality precast elements as

Past weeks Moldtech has signed an agreement for the supply of equipment with one of the leading companies in the construction of infrastructures in Guinea Conakry. This type of technical agreements for equipment production, installation and training of the client’s workers “on site” is complemented by a clear intention of a long-term customer support as

Moldtech has recently delivered a tilting table for precast concrete panels of 48 x 3,50 m size, indicated both for industrial and residential buildings. Our client is an important Mexican industrial group who will start producing precast elements for civil works and industrial-commercial buildings. This tilting table 48 x 3,50 m has been supplied with a pneumatic vibration

Moldtech is currently designing and producing one of its MT20 machinery system, for the efficient manufacturing of dry cast box culverts for one of the most important precasters from Mexico. Our innovative MT20 system is a result of years of research and development after a thorough study of the market for precast box culverts. Most

Moldtech, S.L. will participate in the 2019 Direct Mission to Thailand and Myanmar, which will be held between October 2nd and 9th, with the support of ICEX and the co-financing of European Regional Development Fund (ERDF), having contributed according to their measure, to the economic growth of this company, its region and Spain as a whole.

Between November 4 and 8, the Moldtech sales team responsible for France will be present at a new edition of the “Batimat” construction industry show, which is being held in Paris. The event, which will take place at the Paris Nord Villepinte Exhibition Park, is a milestone of special importance in our commercial development since it

The client, an important Polish contractor with many projects in Poland as well as in countries like Sweden or Belgium, entrusted Moldtech to design, build and commission the equipment to meet their own demand for high-quality precast wall panels. The tilting tables were designed and built according to the client´s requirements, with a size of 16×4,5m and

В июле прошлого года команда из трех специалистов по монтажу отправилась в Ванкувер для установки и ввода в эксплуатацию двух поворотных столов для компании Mardina. В настоящее время Mardina расширяет свой бизнес в сфере производства сборного железобетона, и оба стола размещены на совершенно новом заводе. Размеры столов (34 x 4 метра) были разработаны специально для

Moldtech provides a comprehensive service to its customers that includes the installation and commissioning of the equipment it supplies. To do this, it has a team of multidisciplinary assemblers that performs the necessary tasks to install the equipment and work with the customer during the start-up and manufacturing of the first units when required. Our

Equipped with pneumatic vibration system and heating system, by finned pipe circuit for hot water fitted in the structure of the table. These 12×4 tables with 2 longitudinal shuttering bands collapsible up to 90º. At the request of the client, the joint between the shuttering band and the tables´ surface plate is fitted with a

As every year in the month of July, the obligatory appointment is the “Experience and construction day“, organized by the CERIB, in France. There, in the main facilities of this prestigious French institution, in Épernon, an important agenda of conferences dictated by experts is developed, and as a result of the annual research and development

В ближайшие недели компания MOLDTECH завершает производство нового стационарного стола размером 75×2,40 метра для производства ненапрягаемых преднапряжённых плит, предназначенных для использования в жилых зданиях. Клиент, SOCIETE DES GRANULATS ET BETONS CORSES – SGBC, является важной промышленной группой, занимающейся разработкой карьеров по добыче заполнителей, песка, а также производством бетона и сборных железобетонных элементов, расположенной в Аяччо,