noticias

Moldtech provides a comprehensive service to its customers that includes the installation and commissioning of the equipment it supplies. To do this, it has a team of multidisciplinary assemblers that performs the necessary tasks to install the equipment and work with the customer during the start-up and manufacturing of the first units when required. Our […]

Equipped with pneumatic vibration system and heating system, by finned pipe circuit for hot water fitted in the structure of the table. These 12×4 tables with 2 longitudinal shuttering bands collapsible up to 90º. At the request of the client, the joint between the shuttering band and the tables´ surface plate is fitted with a

As every year in the month of July, the obligatory appointment is the “Experience and construction day“, organized by the CERIB, in France. There, in the main facilities of this prestigious French institution, in Épernon, an important agenda of conferences dictated by experts is developed, and as a result of the annual research and development

In the next weeks, MOLDTECH is finishing the production of a new fixed table of 75×2,40 meters size for the production of non prestressing preslab, to use in residential buildings. The client, SOCIETE DES GRANULATS ET BETONS CORSES – SGBC, is an important industrial group dedicated to the exploitation of quarries of aggregates, sands and

Moldtech, S.L. participates in the Direct Mission to Saudi Arabia and Oman 2019, which takes place between June 23 and 27 and has had the support of ICEX, as well as the co-financing of European FEDER Funds, having contributed according to the measure of them, the economic growth of this company, its region and Spain

The event, organized in the headquarters of ANDECE in Madrid, has been attended by representatives of some of the largest real state developers, who have shared their experiences in recent projects executed with precast concrete industrialized building construction, stating their trust in precast concrete construction as the key to meet the future challenges of the Spanish

Recently Moldtech obtained another order from a company located in the north of Spain with very specific requirements. The first item requested was a transport wagon with up to 24 tons capacity which the customer requires in order to solve the problem of transporting and stacking of finished panels leaving its production line. The next

The event was held at the facilities of the “Poliforum Leon” a convention center at the level of such an important event. This congress has been very important at a technical organizational level and an unprecedented success in terms of precastres participation from Mexico. Moldtech has participated together with its representative for Mexico, INDUSTRIAL AND

In December 2018 Moldtech was awarded a project by an important producer of electrical substations in Sweden for the design and manufacturing of 12 moulds for precast 3D bases for transformer substations. Together with these fixed size moulds we have also supplied a modular mould for double bases allowing producing many sizes up to 8×4,5m, special spreader

The organizing associations of the event (AMIC, ANIPPAC, ATCO, FIHP, ANIVIP and ACI) will bring together companies such as Moldtech with the aim of sharing experiences, knowledge and new technologies from the different specialized actors involved in the sector. Civil engineers, architects, real estate developers, structural designers, builders, industrial businessmen, public sector and specialized suppliers

Gage Brothers is a pioneer company in prefabricated concrete for construction and innovative architecture that since early 2018 bet for a new plant with a high degree of automation. Present in the market since 1915, its main activity are industrial works, commercial buildings and high-rise residences. It is located northwest of Sioux Falls in the state

Moldtech has presence once again in Canada with its molds for prefabricated concrete. In 2017, Moldtech had its first contact with the Canadian market. He signed the first agreement with Armtec supplying a double T mold with satisfactory results. On this occasion Moldtech will work with a leading company in prefabricated concrete located near Vancouver.

Moldtech has already designed and made a tilting table in 2017 obtaining excellent results. Opplandske Betong is a company located in Dokka. They produce ready-mix concrete, facade products, decoration and concrete elements. Due to his large experience, this Norwegian company offers the full development of the project from design to assembly and start up. They

Within this category, the so-called PPVC (pre-finished prefabricated volumetric construction) is gaining popularity as it allows “to do more in the factory and less on the job.” The client, Integrated Precast Solutions (IPS), a subsidiary of well-known contractor Teambuild, is among the leading and most advanced players in PPVC construction around the world. IPS has

STAR TRADING IMPEX S.R.L. is a company that has been working for 25 years in a very competitive panorama. This company has been forging its position in the construction market with its effort and constancy. At this stage, with such a dynamic evolution, it focuses on civil and industrial constructions. They make tailor-made projects where

Moldtech has recently installed a new fixed table of 75×2,40 meters size for the production of non prestressing predalls, to use in residential buildings. The client, SOCIETE DES GRANULATS ET BETONS CORSES – SGBC, is an important industrial group dedicated to the exploitation of quarries of aggregates, sands and to the production of concrete and precast concrete

Moldtech has recently installed a new tilting table 24x4m size for the production of all types of panels for industrial and residential buildings. Our client, Rodiñas Norte, is an important group from Galicia dedicated to the production and installation of all types of precast components for civil works, industrial-commercial and residential buildings. This new tilting table increases

Moldtech has participated in the “Concrete Meeting 2018” organized by the Colombian Association of Concrete Producers, ASOCRETO, in the city of Cartagena de Indias. The congress has been a resounding success since at the technical and organizational level it has been very professional. The prefabrication companies of Colombia and Latin America have been very interested

Moldtech has attended and participated in the “International Conference of Concrete Precast Solutions” organized by the Concrete Precasters Association of Romania, PREFBETON, in the city of Cluj Napoca. This event has been very important in technical and organizational level, and a success in terms of the participation of precasters from Romania. Moldtech has participated in

Moldtech has been chosen in a new project, to provide equipment, installation and the commissioning of a full industrial plant for the production of precast electrical power substations in Algeria. This new industrial precast plant will allow the customer to produce three different types of power substations, whose capacity will be 10 Kva, 30 Kva